Icom IC-705 - Clearing a Memory Channel; MEMORY Screen

7-5
7. MEMORY OPERATION
Clearing a Memory channel
You can clear a no-longer-used memory channel
and reset it as a blank channel, except for the
Call channels (C1 and C2).
1. Select the Memory mode. (Basic Manual)
2. Assign the Select Memory Channel function
to
. (Basic Manual)
3. Rotate
to select the channel to clear.
(Example: channel 01 in group 01)
4. Touch the VFO/MEMORY icon.
5. Touch [M-CLR] for 1 second.
MEMORY screen
»
MEMORY > Group 00 ~ 99, CALL CH
You can edit Memory channel contents on the
MEMORY screen.
1 2 3 4
6
5
7
1Group number: Group name
Displays the group number (00 ~ 99) and
name, if entered.
2Frequency
Displays the entered frequency.
3Operating mode
Displays the selected operating mode.
4Memory menu
Touch to display the MEMORY MENU screen.
LYou can select “Edit Name,” “Memory Write,” or
“Memory Clear.”
5Memory name
Displays the memory name, if entered.
LSee page 7-4 for details.
6Memory select icon (00 ~ 99)
� Touch this icon to set the Select number
“★1,” “★2,” “★3,” or OFF.
LSee page 8-7 for the Select Memory scan.
� Touch the icon for 1 second to display the
SELECT ALL CLEAR screen, and then select
the desired item to reset the Select number.
7Memory channel number
Displays the memory channel number (00 ~
99, C1, C2).
LC1 and C2 cannot be left blank.
TIP: About the QUICK MENU screen
While selecting a memory channel with memory
contents, push
to open the QUICK MENU
screen. You can select SELECT, Edit Name,
Memory Write, Memory Copy, Insert Channel,
Move Channel, Memory Clear, Delete Channel,
or SELECT All Clear.