14-17
14. D-STAR OPERATION (ADVANCED)
Automatic Reply function
When a call addressed to your own call sign is
received, the Automatic Reply function sounds
beeps and automatically replies with your call
sign. (Default: OFF)
Depending on the setting, a recorded message
may be transmitted with the call sign.
1. Open the “Auto Reply” screen.
»
SET > DV SET > Auto Reply
2. Touch an option.
• ON: Automatically replies with your own call
sign. (No audio reply is sent)
• Voice: Automatically replies with your call sign
and an Auto Reply message recorded on
the microSD card (up to 10 seconds).
L If no card is inserted, or no message
is recorded, replies with only your own
call sign (No audio reply is sent).
• Position: Automatically replies with your own
call sign and your position data using
the internal GPS receiver.
L When “GPS Select” is set to “OFF”
or “Manual,” the internal GPS
receiver is temporarily turned ON.
»
GPS > GPS Set
> GPS Select
3. To close the “Auto Reply” screen, push
several times.
Auto Reply icon
• Returns to the standby screen, and displays the
Auto Reply icon.
LWhen “ON” or “Voice” is selected, the Automatic
Reply function is automatically turned OFF,
when you push [PTT].
When “Position” is selected, the Automatic
Reply function remains ON, when you push
[PTT].
Example: After receiving a call from “JM1ZLK,”
beeps sound and the transceiver
automatically sends a reply call.
The “TO” setting does not change, but
“UR: JM1ZLK (Caller’s call sign)” is
displayed.
NOTE: The Automatic Reply function
temporarily sets the received call sign to “TO”
(destination).
TIP: To record the Auto Reply message
You can record the Auto Reply message. See
page 14-18 for details.
»
DV A-RPLY
To Next Page
Loading...
