Icom IC-705 - Viewing Received Call Signs; Dviewing the Call Signs on the RX History Screen

14-12
14. D-STAR OPERATION (ADVANCED)
Viewing received call signs
*
1
The icon differs, depending on the D-PRS TX format.
GPS: Position OBJ: Object
ITEM: Item WX: Weather
*
2
When a name is not entered in the DV Memory, the call
sign is displayed.
When you receive a DV call, the calling station
and the repeater call signs are saved. Up to 50
calls can be saved. When you receive the 51st
call, the oldest call history is deleted.
DViewing the call signs on the RX
History screen
1. Open the RX HISTORY screen.
»
2 > CD
2. Touch an RX history memory to view the details.
L Information
• The RX history number, the caller’s name (or call
sign), destination, RX message, RX date and time,
“GW,” and “GPS” are displayed.
• “GW” is displayed when a Gateway call is received.
• “GPS” is displayed when the received call includes
position data.
• “UP” is displayed when a repeater uplink signal is
received.
• In the QUICK MENU screen, you can select the
following options.
RX>CS: Temporarily enters the
received call sign into “TO.”
Call Sign Display: The received data is displayed
in the Call Sign Display mode.
Name Display: The received data is displayed
in the Name Display mode.
Add to RPT List: Adds the repeater’s call sign
to the Repeater List.
Add to Your Memory: Adds the caller station’s call
sign to Your Call Sign.
Delete:
Deletes the selected RX history.
RX HISTORY screen (RX01)
3. Touch [DETAIL].
• Displays the RX history detail screen.
• Rotate to select the page.
<1st page>
• CALLER: Displays the caller station’s name*
2
and any note entered after the call
sign.
• CALLED: Displays the called station’s name*
2
.
L “CQCQCQ” is displayed when
receiving a Local Area call or
Gateway call.
<2nd page>
• RXRPT1: Displays the repeater’s name*
2
that
was accessed by the caller station. If
the received call was a Gateway call,
this item displays the gateway call
sign of the repeater you received the
call from.
• RX RPT2: Displays the repeater’s name*
2
you
received the call from.
LThe operating frequency is displayed instead of
the above items when the call was not through
a repeater (Simplex call).
*
1
D-PRS information
• Compass direction
• Distance
• D-PRS symbol
History
number
RX
message
Received
date and time
Displayed when a
Gateway call is received.
Caller station*
2
L A note may be
displayed after “/”.
Called
station
Repeater name of
the called station