Icom IC-705 - Dpreparation; Dunzipping the Firmware Folder

17-2
17. UPDATING THE FIRMWARE
General
DPreparation
Access the following URL and download the
firmware file.
https://www�icomjapan�com/support/
LThese instructions are based on Microsoft
®
Windows
®
10.
1. Click the “Firmware/Software” link.
Click
2. Enter “IC-705” into the Search box, and then
click [Search].
1Enter
2Click
3. Click the desired firmware file link.
4. Carefully read “Regarding this Download
Service.” Click “Agree,” and then click
[Download].
1Click
2Click
5. Click “Save as” in the displayed File
Download dialog.
Click
6. Select the location where you want to save
the firmware, and then click [Save] in the
displayed File Download dialog.
Click
• The file starts downloading.
• The firmware and the firm utility are compressed
in a “zip” format folder. Unzip it before use.
DUnzipping the firmware folder
1. Right-click the downloaded firmware folder
(zip format).
• The right-click menu is displayed.
2. Click “Extract All...”
Click
• After unzipping, a folder is created in the same
location as the downloaded folder.
LIn the “705*” folder, “705*.dat” is created.
* Represents the release number.