Icom IC-705 - Disconnecting a Bluetooth Device from the Transceiver; Deleting a Bluetooth Device; From the Pairing List

10-6
10.
Bluetooth
®
OPERATION
Disconnecting a Bluetooth
®
device from the transceiver
There are 3 ways to disconnect a Bluetooth
device (headset device or data device).
• Turn OFF a device.
• Turn OFF the Bluetooth function on a device.
LSee the instruction manual of the headset or a data
device for details.
Or, you can disconnect a Bluetooth device
without canceling the pairing, as described
below.
1. Open the PAIRING/CONNECT screen.
»
SET > Bluetooth Set > Pairing/Connect
2. Touch the Bluetooth device.
• The confirmation dialog “Disconnect?” is
displayed.
3. Touch [YES].
• The transceiver disconnects from the Bluetooth
device, and “(Connect) ” disappears from the
list. However, the transceiver is still paired with
the device.
LWhen you touch the unconnected device
displayed in the pairing list, the transceiver
displays “Connect?.” To connect to the device,
touch [YES].
Deleting a Bluetooth
®
device
from the pairing list
You can delete a Bluetooth device from the
pairing list.
Before deleting a connected Bluetooth device,
disconnect it.
1. Open the PAIRING/CONNECT screen.
»
SET > Bluetooth Set > Pairing/Connect
2. Touch the Bluetooth device for 1 second.
3. Touch “Delete.”
• The confirmation dialog “Delete?” is displayed.
4. Touch [YES].
• Deletes the selected device from the pairing list.
TIP: To connect to a deleted device, you must
first pair with it again.
• Pairing with a headset: p. 10-2
• Pairing with an Android device: p. 10-5