Icom IC-705 - Saving to Memory Channels

13-10
13. D-STAR OPERATION (BASIC)
Saving to Memory channels
When “FROM” (Access repeater) and “TO”
(Destination) settings are saved to a Memory
channel, the settings can be selected by rotating
in the Memory mode.
Step 1: Saving settings into memory
1. On the DR screen, select the “FROM” and
“TO” settings to be saved into memory.
2. Push
.
3. Touch “Memory Write.”
4. Touch “Write to a New Channel.”
5. Touch the desired Memory channel.
(Example: channel 00 in group 00)
LTo change a memory group, touch [GROUP].
Touch to change
a memory group.
6. Touch [YES].
• The operating data is entered in the selected
channel. “FROM” and “TO” names are
automatically entered as the Memory name.
(Up to 16 alphanumeric characters.)
Step 2: View the saved contents
1. Hold down
for 1 second to cancel the DR
screen.
2. Select the Memory mode.
3. Rotate
to select the saved channel.
(Example: channel 00 in group 00)
Memory name
TIP: Checking the Memory contents
You can check the Memory contents on the
MEMORY screen.
1. Open the MEMORY screen.
»
MEMORY
2. Touch a group that contains the Memory
channel you want to check. (Example: 00)