7-6
7. MEMORY OPERATION
Memo Pad
There are 5 Memo Pads as the default to save
frequencies and operating modes for easy writing
and recall. You can increase the Memo Pads to
10 in the following item.
»
SET > Function > Memo Pad Quantity
LThe Memo Pads are separate from memory
channels.
Memo Pads are convenient when you want to
temporarily memorize a frequency and operating
mode, such as when you find a DX station in a
pile-up, or when the desired station is busy for
a long time and you want to temporarily look for
other stations.
DSaving the contents into a Memo Pad
1. Select the VFO mode. (Basic Manual)
2. Set the frequency and operating mode, then
push
for 1 second.
• A beep sounds.
LWhen you save up to the set number of Memo
Pads in “Memo Pad Quantity,” the oldest Memo
Pad is automatically cleared for the new Memo
Pad.
NOTE: Each Memo Pad must have its own
unique contents. The Memo Pads with identical
content cannot be saved.
DCalling up the Memo Pads
1. Select the VFO mode. (Basic Manual)
2. Push
several times until the desired
Pad is displayed.
LPushing selects the Memo Pads.
LThe calling up starts with the most recently
saved Pad.
DMEMO PAD screen
The MEMO PAD screen displays the saved
contents in a list, in which you can select or
delete the saved contents.
»
MPAD
Temporary Pad
TIP: If you change the frequency or operating
mode called up from Memo Pads, the contents
are automatically updated in a temporary Pad.
Key Action
Scrolls through the list.
DEL
Touch for
1 second
Deletes the selected Memo Pad.
DEL ALL
Touch for
1 second
Deletes all the Memo Pads.
EXPAND
Select to display the MEMO PAD list in the
Expanded or Normal screen.
To Next Page
Loading...
