8-2
8. SCANS
SCAN screen
Display the SCAN screen.
»
SCAN
VFO mode
Memory mode
Key Action
PROG
Touch
Starts or cancels a Programmed
scan.
Touch for
1 second
Displays the SCAN SELECT
screen.
MEMO
Touch Starts or cancels a Memory scan.
Touch for
1 second
Displays the SCAN SELECT
screen.
∂F Starts or cancels a ∂F scan.
FINE
While Programmed scanning, touch to switch
to the Fine Programmed scan.
While ∂F scanning, touch to switch to the
Fine ∂F scan.
L In the Memory mode, this key is displayed
when a ∂F scan is started.
SELECT
Touch
Selects a Memory channel
(except C1 and C2) to set as a
Select Memory channel.
• “★1,” “★2,” “★3,” or “(no icon)”
Touch for
1 second
Displays the SELECT ALL
CLEAR screen.
SEL No.
Selects the Select scan number for the
Select Memory scan.
• “★1,” “★2,” “★3,” or “★1,2,3”
∂F SPAN
Selects a ∂F span.
• ±5.0 kHz, ±10 kHz, ±20 kHz, ±50 kHz,
±100 kHz, ±500 kHz, or ±1 MHz
SET Displays the SCAN SET screen.
� Push to display the SCAN SELECT
screen.
LIf you push while scanning, the scan is
canceled.
� Hold down for 1 second to start the
previously selected scan.
To Next Page
Loading...
