Icom IC-705 - Copying the Memory Channel Contents; Dcopying to the VFO; Dcopying to Another Memory Channel

7-3
7. MEMORY OPERATION
Copying the Memory channel contents
You can copy a Memory channel contents to the
VFO or to another Memory channel.
DCopying to the VFO
1. Select the Memory mode. (Basic Manual)
2. Assign the Select Memory Channel function
to
. (Basic Manual)
3. Rotate
to select the channel to be
copied. (Example: channel 01 in group 00)
4. Touch the VFO/MEMORY icon.
5. 
• A beep sounds, and the selected memory
contents are copied to the VFO.
6. Touch [VFO] to select the VFO mode.
DCopying to another Memory channel
1. Select the Memory mode. (Basic Manual)
2. Assign the Select Memory Channel function
to
. (Basic Manual)
3. Rotate
to select the channel to be
copied. (Example: channel 00 in group 00)
4. Open the MEMORY GROUP screen.
»
MEMORY
5. Touch a memory group. (Example: 00)
6. Touch of the channel that you want to write
the copied contents to. (Example: channel 04)
LDO NOT rotate . Select the channel by
rotating .
7. Touch “Memory Write.”
8. Touch [Yes].
• A beep sounds, and the selected memory
contents are copied.
9. To close the MEMORY screen, push .