2-8
2. ADVANCED OPERATIONS
Operating RTTY (FSK)
DTransmitting an RTTY memory content
You can transmit the preset characters on the
RTTY MEMORY screen.
LYou can edit the contents by touching [EDIT] on the
RTTY MEMORY screen.
1. Display the RTTY DECODE screen in the
RTTY mode.
»
DECODE
2. Touch [TX MEM].
3. Touch an RTTY memory between [RT1] and
[RT8] to transmit. (Example: RT1)
Transmitting
Transmitting contents are displayed.
• The TX status indicator lights red and the Po
meter swings.
LTo cancel the transmission and to return to the
RTTY DECODE screen, push .
LAfter transmitting, automatically returns to
receive.
Memory Preset characters by default
RT1
↵ DE ICOM ICOM K ↵
RT2
↵ DE ICOM ICOM ICOM K ↵
RT3
↵ QSL UR 599–599 BK ↵
RT4
↵ QSL DE ICOM ICOM UR 599-599 BK ↵
RT5
↵ 73 GL SK ↵
RT6
↵ CQ CQ CQ DE ICOM ICOM ICOM K ↵
RT7
↵ MY TRANSCEIVER IS IC–705 &
ANTENNA IS A TRIBAND WHIP. ↵
RT8
↵ MY RTTY EQUIPMENT IS INTERNAL FSK
UNIT & DEMODULATOR OF THE IC–705. ↵
When an external keypad is connected:
You can transmit the preset contents in the
RTTY memory (RT1 ~ RT8) from an external
device by setting the “External Keypad,” and
then connecting an external keypad to [KEY] on
the IC-705.
»
SET > Connectors > External Keypad
To Next Page
Loading...
