8-8
8. SCANS
Mode Select scan
Repeatedly scans Memory channels (except
C1 and C2) that are set to the mode selected
before starting the scan.
Only Memory channels set to
the FM mode are scanned.
Ch 99
FM
Ch 00
FM
Ch 01
AM
Ch 02
FM
Ch 03
FM
Ch 04
FM
Ch 05
FM
Ch 06
AM
Ch 50
DV
Ch 98
FM
(Example: FM channels)
DMode Select scan operation
1. Select the Memory mode.
2. Set the operating mode.
3. Display the SCAN screen.
»
SCAN
4. Touch [MEMO] for 1 second.
5. Touch “MODE SELECT SCAN.”
Blinks
• The Mode Select scan starts.
LWhen a signal is detected, the scan pauses
according to the “SCAN Resume” setting, and
then resumes.
LTo cancel the scan, touch [MEMO].
6. To close the SCAN screen, push .
To Next Page
Loading...
