Icom IC-705 - Dsetting D-PRS Weather

12-12
12. GPS OPERATION (ADVANCED)
Transmitting D-PRS data
D Setting D-PRS Object/Item
DSetting D-PRS Weather
Set to transmit as a D-PRS Weather station.
LSee page 12-39 for details.
10� Selecting the SSID
To assist in identifying your station’s type, select
the APRS
®
(Automatic Packet Reporting System)
based SSID after the D-PRS data call sign.
(p. 12-33)
11� Setting the Time Stamp
LThis item is displayed when the TX format is
“Object.”
Set the Time Stamp function to transmit the
received time data in UTC (Universal Time
Coordinated) time. (p. 12-36)
12� Exiting the OBJECT or ITEM screen
To close the OBJECT or ITEM screen, push
several times.
• Returns to the standby screen, then is
displayed.
1� Setting the GPS TX Mode to D-PRS
»
GPS > GPS TX Mode > D-PRS
2� Checking the Unproto Address
You should use the default address, and editing
is not recommended.
3� Setting the TX format to “Weather”
Set “TX Format” to “Weather.”
4� Setting the Symbol
Select the Symbol that indicates the weather
station.
LSee page 12-32 to directly enter the Symbol.
5� Selecting the SSID
To assist in identifying your station’s type, select
the APRS
®
(Automatic Packet Reporting System)
based SSID after the D-PRS data call sign.
(p. 12-33)
6� Entering a comment
Enter a comment to transmit as a D-PRS
Weather station.
1. Touch “Comment.”
2. Push
.
3. Touch “Edit.”
4. Enter a comment.
5. After entering, touch [ENT].
6. Push
.
7� Setting the Time Stamp
Set the Time Stamp function to transmit the
received time data in UTC (Universal Time
Coordinated) time. (p. 12-39)
8� Exiting the WEATHER screen
To close the WEATHER screen, push
several times.
• Returns to the standby screen, then is
displayed.