Icom IC-705 - Page 115

12-32
12. GPS OPERATION (ADVANCED)
»
GPS
GPS TX Mode (Default: OFF)
Selects a GPS transmission mode to send GPS
position data while in the DV mode.
• OFF: Does not transmit GPS data.
• D-PRS: Transmits GPS data in the D-PRS
format.
• NMEA: Transmits GPS data in the NMEA
format.
»
GPS > GPS TX Mode > D-PRS
Unproto Address (Default: API705,DSTAR*)
Displays an unproto address of up to 56
alphanumeric characters.
NOTE: You should use the default address, and
editing is not recommended.
TX Format (Default: Position)
Selects the format to transmit the position data in
the D-PRS mode.
• Position: The caller station is the mobile or
base station.
• Object: Transmits a certain location’s
information, such as an event,
earthquake, and so on.
(The time stamp data is included.)
• Item: Transmits repeater or antenna
information that needs no time
information.
(
The time stamp data is not included. )
• Weather: Transmits weather information
received from a weather device.
GPS SET
»
GPS > GPS TX Mode > D-PRS
> TX Format > Position
Symbol (Default: Person)
Selects the symbol that indicates your operating
situation. The selected symbol channel’s symbol
(1~4) is transmitted along with the position data.
Editing a symbol
1. Touch the symbol channel for 1 second.
2. Touch “Edit Symbol.”
3. Push
.
4. Touch “Direct Input.”
5. 
6. 
Selectable characters and symbols
<For the first digit> /, \, 0 to 9, A to Z
<For the second digit> A to Z, a to z, 0 to 9, ! “ # $ %
& ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
7. After editing, touch [SET].
• Sets the Symbol into the channel selected in
step 1.
Editing a symbol
1. Touch the symbol channel for 1 second.
2. Touch “Edit Symbol.”
3. Touch the symbol.
• Sets the Symbol into the channel selected in
step 1.