2-4
2. ADVANCED OPERATIONS
Operating CW (ADVANCED)
DKeyer memory edit menu (EDIT)
You can edit the Keyer memory contents.
LYou can use up to a total of 8 Memory Keyers (M1
to M8), and you can enter up to 70 characters in
each memory.
Example: Entering “QSL TU DE JA3YUA TEST”
to M3
1. Display the KEYER MEMORY screen in the
CW mode.
»
KEYER > EDIT/SET > EDIT
2. Touch “CFM TU” for 1 second.
3. Touch “Edit.”
4. Touch [CLR] on the Keyer Memory keyboard
until the preset contents are cleared.
5. Enter “QSL TU DE JA3YUA TEST,” and then
touch [ENT] to save.
6. To close the KEYER MEMORY screen, push
.
Selectable characters
Alphabets ABCDEFGHIJKLMNOPQRSTUVWXYZ
Symbols / ? ^ . , @ *
Numbers 1234567890
About the symbols
• Enter the “^” to send a string of characters with no
intercharacter space. Put “^” before a text string
such as ^AR, and the string “ar” is sent with no
space.
• Enter the “*” (asterisk) to insert the CW contest
number. The number automatically advances by 1.
You can use this for only 1 Memory keyer at a time.
The “*” is used in Memory Keyer M2 by default.
To Next Page
Loading...
