9-8
9. OTHER FUNCTIONS
Setting the Opening picture
You can set a picture that is displayed at power ON.
NOTE: To set the displayed picture, a microSD
card (user supplied) is required.
About a picture file to use
• File type: 24 bit bitmap
(The file extension is “bmp.”)
• Picture size: 480 x 272 (px)
• File name: Up to 23 characters
(except the filename extension)
Step 1� Saving a picture on the microSD card
(PC)
1. Copy a picture file into the “IC-705” >
“OpeningPicture” folder on the microSD card.
LSee page 4-5 for detail.
2. Insert the microSD card into the transceiver.
Step 2� Setting the displayed picture
(Transceiver)
1. Open the OPENING PICTURE screen.
»
SET > SD Card > Opening Picture
2. Touch a picture to display.
3. Touch [SET].
LTouch to select the picture again.
4. Touch <YES>.
• The transceiver will automatically restart, and
the selected picture is displayed.
To hide the picture at power ON
Touch “<<Cancel Opening Picture Setting>>” in
step 2.
LThe selected picture can be displayed even if:
• No microSD card is inserted.
• You do a Partial Reset or All Reset.
To Next Page
Loading...
