8-6
8. SCANS
Memory scan
Repeatedly scans all entered Memory channels
(except C1 and C2).
Blank (not entered) Memory channels are
skipped.
Ch 99
Blank channels are skipepd.
Ch 00
Ch 01 Ch 02 Ch 03
Ch 04
Ch 05Ch 06Ch 50Ch 98
LIf two or more Memory channels are not entered,
the Memory scan does not start.
DMemory scan operation
1. Select the Memory mode.
2. Display the SCAN screen.
»
SCAN
3. Touch [MEMO] for 1 second.
4. Touch “ALL MEMORY SCAN.”
Blinks
• The All Memory scan starts.
LWhen a signal is detected, the scan pauses
according to the “SCAN Resume” setting, and
then resumes.
LTo cancel the scan, touch [MEMO].
5. To close the SCAN screen, push .
TIP: Touch GROUP 00 ~ 99 in step 4 to scan
through the Memory channels in the selected
group. (Example: GROUP 00)
To Next Page
Loading...
