9-4
9. OTHER FUNCTIONS
NTP function
The Network Time Protocol (NTP) function
synchronizes the internal clock with a time
management server.
LTo use this function, an internet connection and
default gateway settings are necessary.
DUsing the NTP Time Synchronize
function
Using this function, you can manually
synchronize the internal clock by accessing a
time management server.
1. Open the DATE/TIME screen.
»
SET > Time Set > Date/Time
2. Touch “<<NTP TIME SYNC>>.”
• “ NTP Time Sync. Please wait...” is displayed.
• The transceiver starts accessing the NTP server
address that is set in “NTP Server Address.”
3. When “Time Sync completed.” is displayed,
touch [OK].
4. To close the DATE/TIME screen, push
several times.
DUsing the NTP function
By turning ON the NTP function, the transceiver
automatically synchronizes the internal clock with
the time management server.
LThis function is set to ON by default.
1. Open the DATE/TIME screen.
»
SET > Time Set > Date/Time
2. Touch “NTP Function.”
3. Select ON or OFF.
• When ON is selected, the transceiver starts
accessing the NTP server address that is set in
“NTP Server Address.”
4. To close the DATE/TIME screen, push
several times.
To Next Page
Loading...
