14-2
14. D-STAR OPERATION (ADVANCED)
“FROM” (Access repeater) setting
DUsing your transceiver’s repeater list
When your access repeater is in your
transceiver’s repeater list, you can select it from
the list. By just selecting the repeater from the
list, the repeater call sign, its frequency, duplex
setting, and frequency offset are automatically
set, for easy operation.
Example:
Selecting the “Kirkland” repeater in
Washington state in the USA from the
repeater list.
1. Hold down for 1 second to display the DR
screen.
2. Touch “FROM” to select, and then touch
“FROM” again.
3. Touch “Repeater List.”
• Displays the REPEATER GROUP screen.
4. Touch the repeater group where your access
repeater is listed.
5. Touch your access repeater. (Example: Kirkland)
• Returns to the DR screen, and the selected
repeater name is displayed in “FROM.”
LBy just selecting the repeater name, the
repeater call sign, its frequency, duplex setting,
and frequency offset are automatically set.
TIP:
When you select an FM repeater:
When an FM repeater is in your transceiver’s
repeater list, you can select it from the list.
When selecting an FM repeater, the “TO” setting is
not necessary, and a “---” is displayed in “TO.”
When selecting an FM repeater.
How to change the repeater group:
To change the repeater group on the DR
screen, push
, then touch “Group Select.”
To Next Page
Loading...
