14-16
14. D-STAR OPERATION (ADVANCED)
Automatic DV detection
If you receive an FM signal while in the DV
mode, the “DV” and “FM” icons alternately blink
to indicate the received signal is FM.
When the DV Auto Detect function is ON, the
transceiver automatically selects the FM mode to
temporarily monitor the signal. (Default: OFF)
LRegardless of this setting, the “DV” and “FM” icons
alternately blink if you receive an FM signal while in
the DV mode.
NOTE: When Digital Call Sign squelch (DSQL)
or Digital Code squelch (CSQL) is selected, the
transceiver does not receive FM signals, even
if this function is ON. You can silently wait for
calls from others.
1. Open the “DV Auto Detect” screen.
»
SET > DV SET > DV Auto Detect
2. Touch “ON.”
3. To close the DV SET screen, push
several times.
LWhen an FM signal is received while in the DV
mode, the “DV” and “FM” icons sequentially
blink, and the transceiver receives the signal in
the FM mode.
When an FM signal is received while in the DV mode
DV Auto Detect function: OFF
The “DV” and “FM” icons alternately blink, but the
audio cannot be heard.
DV Auto Detect function: ON
The “DV” and “FM” icons alternately blink, and
the audio can be heard.
…
Thanks for
the nice QSO!
You can hear
the audio!
You cannot hear
the audio.
The icons
alternately blink.
The icons
alternately blink.
To Next Page
Loading...
Need help?
General
