Icom IC-705 - Dwhen Connecting Your Device to the Internet Using a Cellular System

15-8
15. ABOUT THE DV GATEWAY FUNCTION
Setting up a network
DWhen connecting your device to the Internet using a cellular system
A Global IP address
A static or dynamic IPv4 Global IP address assigned to your Windows or Android device is needed.
Ask your cellular system company to provide a Global IP address to your device.
NOTE:
• Turn OFF your Wi-Fi setting when you operate using a cellular system.
• Communication errors may occur when using a cellular system.
• Depending on your contract, you may be charged a large or additional communication fee. Ask your cellular
service provider about the content of your contract.
 When using a Windows device, go to “Setting up the RS-MS3W.” (p. 15-12)
 When using an Android device, go to “Setting up the RS-MS3A.” (p. 15-13)
INTERNETINTERNET
A Global IP address is required to use the DV
Gateway function.
USB cable
USB cable
*
1
*
2
*
1
You can use a cellular system compatible computer.
*
2
Needs a Global IP address.
*
2