2-9
2. ADVANCED OPERATIONS
Operating RTTY (FSK)
DEditing an RTTY memory
You can edit the characters in the RTTY
memories. You can save and transmit 8 RTTY
memories (RT1 ~ RT8) for often-used RTTY
messages. Each RTTY memory can contain up
to 70 characters.
Example: Editing the content in RT2
1. Display the RTTY DECODE screen in the
RTTY mode.
»
DECODE
2. Touch [TX MEM].
3. Touch [EDIT].
4. Touch the memory for 1 second.
5. Touch “Edit.”
6.
move the cursor, then touch [CLR].
7. Enter new characters, and then touch [ENT]
to save.
8. To close to the RTTY MEMORY screen, push
.
To Next Page
Loading...
