13-16
13. D-STAR OPERATION (BASIC)
Updating the repeater list
Step 4: Removing the microSD card
Turn OFF the transceiver, then remove the
microSD card from your PC, and insert it into the
transceiver’s slot.
TIP: We recommend that you save the
current data before loading other data into the
transceiver.
From the Card reader
PC
Transceiver
Step 5: Updating the repeater list
1. Open the IMPORT/EXPORT screen.
»
SET > SD Card > Import/Export
2. Touch “Import.”
3. Touch “Repeater List.”
4. Touch the CSV file to import.
(Example: 705_USA_Rpt_yymmdd)
5. Touch [YES] or [NO].
• YES: Retains the Skip settings of the repeater
list. (p. 14-31)
• NO: Does not retain the Skip settings of the
repeater list.
6. Touch [YES].
• After the importing ends, “COMPLETED!
Restart the IC-705.” is displayed.
7. Turn the OFF transceiver power, then turn it
ON again to restart the transceiver.
TIP: If you copy the ICF file to the “Setting”
folder of the microSD card, the repeater list can
be updated with the same procedures. In that
case, touch “Load Setting” on the SD CARD
screen. And on the LOAD FILE screen, touch
“Repeater List Only.”
»
SET > SD Card > Load Setting
To Next Page
Loading...
Need help?
General
