15-23
15. ABOUT THE DV GATEWAY FUNCTION
Problem Possible Cause Solution REF�
After your call, the repeater
replies ’RPT?’ and the access
repeater’s call sign.
The repeater cannot connect to the
destination repeater.
Wait for a while, and try again. –
The repeater is busy.
“L” appears on the LCD. While receiving through the
Internet, some packets may be lost
due to network error (poor data
throughput performance).
Wait for a while, and try again.
L When the transceiver receives
corrupted data, and misidentifies it
is as Packet Loss, “L” is displayed.
–
You can transmit, but cannot
receive from the destination
repeater.
You cannot connect to the Internet,
or Global IP address is not assigned.
Check the Internet connection and
Global IP address assignment.
p. 15-4
The router or mobile router’s port is
not correctly forwarded.
Forward the router or mobile
router’s correct port to your deice.
p. 15-4
The firewall is blocking the
necessary port.
Check your firewall settings. p. 15-12
Troubleshooting
D Troubleshooting for the Terminal mode operation
To Next Page
Loading...
