IFM O3M150 - Page 47

47
ifm Vision Assistant O3M
UK
Button Name Description
Ambient temperature
Set the frame rate of the device according to the ambient temperature:
● 85°C: Frame rate of 25 Hz
● 75°C: Frame rate of 33 Hz
● 65°C: Frame rate of 50 Hz
Always use the highest possible frame rate.
Application
Use the "Outdoors" setting if strong environmental influences are to be
expected in the application. The setting affects the:
● Filter signal quality (→ „10.3 Signal quality filter“)
● Noise reduction filter (→ „10.4 Noise reduction filter“)
Use the "Indoors" setting if insignificant environmental influences are to be
expected in the application. The setting affects the:
● Filter signal quality (→ „10.3 Signal quality filter“)
● Noise reduction filter (→ „10.4 Noise reduction filter“)
Visibility conditions
Activate the "Visibility conditions" setting if the visibility conditions are
often bad. The setting affects the:
● Filter signal quality (→ „10.3 Signal quality filter“)
● Spray detection (→ „10.5 Detection of spray/fog/dust“)
Dusty and foggy environmental conditions require stronger data
filtering. The "Visual conditions" setting reduces the device's
range.
Detection of soiling
Use the setting "Soiling detection" to set the sensitivity of the soiling
detection:
The setting affects the: Soiling detection
(→ „10.6 Soiling detection“).
► Click on [Next].