Intermac Primus 184 - 2.4 Base and basin

2 Machine description
BIESSE S.p.A. © - p702k0003.fm251111
25
2.4 Base and basin
The single-piece base A (used in the Primus 184) contains primarily the machining water
collection basin B, where the work table C is housed. On the long sides there are the slide seats D
for the mobile beam. In the rear part and inside the basin there are the flanges of the ducts E for
the machining water recirculation system.
The machine is fitted with adjustable support feet F for levelling purposes.
In the Primus 322/324, the base is modular and the basin is separate.
A
D
F