Intermac Primus 184 - Introduction; Conventions

Introduction
BIESSE S.p.A. © - P701K0001.fm251111 9
Introduction
This document, together with the interface instruction manual and any attachments, provide the
information required for proper use of the machine. The procedures indicated must only be carried
out by staff with adequate training.
In order to avoid incorrect manoeuvres that might result in injury to persons it is important to read
and fully understand all the documents supplied with the machine. The manufacturer cannot be
held responsible or legally liable for any damage resulting from incorrect use of the documentation.
The description or illustration of certain devices may differ slightly from the actual ones without in
any way compromising their comprehension. Some devices indicated and described in this
manual may not be present on your machine.
This document complies with the indications in Machine Directive 2006/42/CE.
Conventions
The text sections that must not be overlooked are highlighted and preceded by the symbols
described and illustrated below.
Paragraphs marked with this symbol indicate an imminent danger, and the contents
must therefore be taken into careful account in order to prevent a serious accident.
Paragraphs marked with this symbol indicate procedures to be used and actions to
be taken to avoid any damage to goods and property.
This symbol is used to indicate points of particular importance that must not be overlooked.