Analytical Index
128
BIESSE S.p.A. © - P5802P0108IX.fm251111
N
N electric diagram, 31
noise level, 95
noise produced by the machine, 95
number of power supply phases, 31
numerical control, 24
O
oil separator filter
maintenance, 81
operating head, 24
operating section
anti-collision thickness tracer, 53
information, 51
machining parameters, 51
operation
of the machine, 35
operator console, 24
origins, 34
management and selection, 62
P
parts to be transported, 98
pedal
valve command, 44
personnel
qualifications, 40
piece
positioning and locking, 63
unloading, 65
pneumatic pressure
supply pressure, 104
pneumatic system
compressed air requirements, 104
maintenance of the air treatment units, 78
supply pressure, 31, 104
system requisites, 104
positioning
of the machine, 99
positioning and locking
of the piece, 63
potentiometer
for adjusting axis interpolation during machining
operation, 48
for adjustments in manual-quick mode, 47
power, 31
preparation, 16
procedure
for carrying out a machining operation, 62
Q
qualifications
of the personnel, 40
R
rated current, 31
recirculation system
maintenance, 76
recycling pump
maintenance and overhaul, 85
reference points, 34
replacing
oil separator filter, 81
the dryer filters, 79
reset
button, 46
of the machine axes, 58
residual risks, 41
restoring
normal machine functioning, 59
RM850 hand-held button pad
confirm menu function, 48
emergency button, 47
Esc, 48
“man present” button, 47
potentiometer for adjusting axis interpolation during
machining operation, 48
potentiometer for adjustments in manual-quick mode,
47
Reset, 48
scroll menu buttons, 48
Start button, 48
start station 1, 47
start station 2, 48
Stop, 47
valve command button, 48
S
safety, 13
danger signs, 19
devices, 30
first aid and medical assistance, 13
fixed and mobile guards, 110
for lifting and handling, 15
for machine installation, 15
for machine maintenance, 17
for machine scrapping, 18
general prohibition signs, 19
obligation signs, 20
signs fixed to the machine, 20
safety devices, 30
cut-out valve, 30
To Next Page
Loading...