11 Routine and special maintenance
BIESSE S.p.A. © - p714k0003.fm251111
71
Cleaning the guides
Every month, clean all the guides involved in the movement of the X, Y and Z axes; use clean, dry
cloths.
Clean the racks of the X and Y axes, removing any encrustations with a bronze bristle brush.
Clean the screw of the Z-axis, removing any encrustations with a bronze bristle brush.
After cleaning, use a brush to apply a thin layer of AGIP GR MU EP 0 lubricant to the relevant
areas.
To Next Page
Loading...