Analytical Index
BIESSE S.p.A. © - P5802P0108IX.fm251111
129
emergency button, 30
safety guards, 30
safety guards, 24, 30
characteristics, 110
scrapping
safety information, 18
short-circuit
short-circuit cut-out power at the supply voltage, 31
signs
fixed to the machine, 20
general prohibition, 19
obligations, 20
of danger, 19
start station 1
button, 45, 47
start station 2
button, 45, 48
start-up
of the machining operation, 64
stopping
the machine, 58
supply voltage, 31
switching off
the machine, 59
switch-on
button, 46
T
technical characteristics
lighting, 93
of the machine axes, 94
temperature in the installation area, 105
thickness tracer
button, 46
topping up
the level of lubricant in the pump, 75
transfer
warnings, 97
transport
of the machine, warnings, 97
of the parts, 98
U
UHP (Ultra High Pressure) intensifier, 24
UHP intensifier
console, 44
UHP intensifier on/off
button, 46
unloading
lifting, 100
lifting safety, 99
responsibility for machine unloading, 99
the piece, 65
USB
connection, 45
USB port
input, 45
use
of the machine, 37
using
the hand-held button pad, 49
W
warnings
relating to the machining operation, 61
water cleaning
extraction of the suspended solids, 56
lifting, 55
physical treatment, 55
water consumption
of the machine, 93
water level lowering
button, 46
water level raising
button, 46
weight, 31
work
area, 40
work table, 24, 29
admissible weight, 93
cleaning, 69
workable material
characteristics, 38
dimensions, 38
working
dimensions of machine, 103
working areas, 34
working cycle, 64
working head
maintenance, 72
X
X-axis mobile beam, 24
To Next Page
Loading...