Intermac Primus 184 - 4.6 Danger area; 4.7 Residual risks

4 Intended use and unintended use
BIESSE S.p.A. © - p703k0003.fm251111
41
Position the machine in such a way as to leave spaces and escape routes, even with the mobile
guards open (in compliance with safety regulations).
• For each work place, there must be a minimum clearance of 2m
2
.
• The machine installation area must have an air volume of 10m
3
.
4.6 Danger area
The danger area is the entire area occupied by moving parts during the machining operations. It is
suitably protected by the guards (photoelectric barriers) that enclose the machine.
4.7 Residual risks
=
DANGER! Make sure there are no persons or objects that could be
knocked before restoring the safety barriers