Intermac Primus 184 - 2.6 3-axis working head (X, Y, Z)

2 Machine description
BIESSE S.p.A. © - p702k0003.fm251111
27
2.6 3-axis working head (X, Y, Z)
The working head is located on the mobile beam. It is formed of:
A Z-axis carriage
B - Cutting head: a support for housing the orifice and the focusing nozzle. A mobile guard
(called a "hood") encloses the cutting area.
The cutting head is usually closed to allow the passage of the pressurised water on
command. This means that in the event of a fault or blackout, the head interrupts the flow
automatically.
CThickness tracer
D Laser pointer
E Hopper (optional)
A
C
B
E
D