Intermac Primus 184 - 12.4 Admissible weight on the work table; 12.5 Water consumption; 12.6 Electrical characteristics; 12.7 Lighting

12 Technical characteristics
BIESSE S.p.A. © - p724k0003.fm251111
93
12.4 Admissible weight on the work table
On the machines of the Primus range, a weight of no more than 1000kg/m² can be applied on the
work table.
The maximum dimensions of the sheet that can be loaded on the work table are 2010 x 4200mm.
Do not exceed the weight limit indicated by the manufacturer, as doing so could
jeopardise the stability and rigidity of the machine.
12.5 Water consumption
12.6 Electrical characteristics
Refer to the data given on the plates fixed to the machines (see page 31).
12.7 Lighting
The Primus line does not have its own lighting devices.
The user must guarantee the two areas required by the regulation:
visual task area
immediately adjacent area
The minimum values prescribed by the industrial and craft activities Standard for general
machining operations concerning this machine is 300 LUX (lx).
Water consumption of
the intensifier l/min
Water consumption of
the washing pump
l/min
Primus See 12.3 “General
intensifier data”
18