Index
6
BIESSE S.p.A. © - P5802P0108TOC.fm251111
3.6 Machine operation ........................................................................................................... 35
4 Intended use and unintended use
4.1 How to use the machine .................................................................................................. 37
4.2 Characteristics and dimensions of workable materials .................................................... 38
4.3 Executable machining operations .................................................................................... 39
4.4 Personnel qualifications ................................................................................................... 40
4.5 Work area ........................................................................................................................ 40
4.6 Danger area ..................................................................................................................... 41
4.7 Residual risks .................................................................................................................. 41
5 Commands and indicator devices
5.1 Layout of the commands and indicator devices - Primus ............................................... 44
5.2 Main control panel ............................................................................................................ 45
5.3 hand-held button pad ....................................................................................................... 47
5.3.1 Using the hand-held button pad .................................................................................... 49
6 Preparing the operating section
6.1 Cutting unit ....................................................................................................................... 51
6.2 Machining parameters ..................................................................................................... 51
7 Anti-collision thickness tracer
7.1 General remarks .............................................................................................................. 53
7.2 Use ................................................................................................................................... 53
8 Using the machining water recirculation system
8.1 Lifting ............................................................................................................................... 55
8.2 Physical treatment ........................................................................................................... 55
8.3 Extraction of the suspended solids .................................................................................. 56
9 Basic use
9.1 Machine start-up .............................................................................................................. 57
9.2 Resetting the machine axes ............................................................................................. 58
9.3 Stopping the machine functions ....................................................................................... 58
9.4 Restoring normal machine functioning ............................................................................. 59
9.5 Switching the machine off ................................................................................................ 59
9.6 Using the abrasive distribution system (optional) ............................................................ 60
To Next Page
Loading...