Intermec CK30

Using the Terminal Emulation Menus—Chapter 4
159TE 2000
 5250 Terminal Emulation Programmer’s Guide
S Select “Menu Settings” to add an “M” button to your toolbar. Tap this
to access the menu settings selected from the menu settings screen in
option two under LCD parms. Default settings bring up this screen:
S Select “Switch Session” to add an “S” button to your toolbar. Tap this
to access Session Switching. See page 174 for more information on ses-
sion switching. Note that if you tap this button while in the TE menus, no
action will occur.
S Select “Exit” to add an “EXIT” button to your toolbar. Tap this button
to exit the TE 2000 application. Enter the password (default is
cr52401),thentapYes to continue.