GENERAL
This section contains lubrication and maintenance
charts. For easy reference a 25" x 19" wall chart can
be obtained from your Jacobsen Distributor.
Footnotes are found on Page 11C-4 and are shown in
bold type; example: a, b, etc.
LUBRICATION SCHEDULES
The following lubrication charts outline grease and oil
intervals. Intervals are based on a 40 hour week. These
are suggested intervals only. As experience is gained in
operating this machine, the schedule can be tailored to
your operating time. Reference numbers are keyed to
the illustration on page 11C-3. The footnotes on page
11C-3 (letters a thru k) give more detailed information.
PREVENTIVE MAINTENANCE
SECTION 11B. LUBRICATION SCHEDULES AND CHARTS
11B-1
11B
Ref. Qty. Description Remarks
40 HOURS (Every Week)
12a Steering axle spindle housings
21a Steering axle pivot
31a Steering column tilt
41a Brake pedal pivot
52a Pump drive shaft
72a Axle drive shaft
ANNUALLY
61h Pump shaft spline
81h Axle input shaft spline
TRACTOR GREASE CHART
Ref. Qty. Description Remarks
MONTHLY
93 Lift valve linkage
10 6 Traction pedal linkage
11 1 Master cylinder ball joint
12 2 Parking brake cable pulleys
TRACTOR OIL CHART (Use SAE 30 Oil)
Ref. Qty. Description Remarks
14 1 g Axle Check daily, change annually.
15 1 h Parking brake lever Monthly.
TRACTOR LUBRICATION CHART
To Next Page
Loading...
