CHAPTER 10
AC Power Requirements and
Specifications
•
M7i Router AC Power, Connection, and Power Cord Specifications on page 83
•
M7i Router AC Power Supply Specifications on page 85
M7i Router AC Power, Connection, and Power Cord Specifications
Detachable AC power cords, each 2.5 m (approximately 8 ft) long, are supplied with the
router. The C13 appliance coupler at the female end of the cord inserts into the AC
appliance inlet coupler, type C14 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source receptacle that is standard for your geographical location.
WARNING: The AC power cord for the router is intended for use with the
router only and not for any other use.
WARNING:
Translation from Japanese: Theattachedpower cable is only for this product.
Do not use the cable for another product.
83Copyright © 2019, Juniper Networks, Inc.
To Next Page
Loading...
