CHAPTER 19
Providing Power to the M7i
•
Connecting Power to an AC-Powered M7i Router on page 123
•
Connecting Power to a DC-Powered Router on page 124
•
Powering On the M7i Router on page 125
•
Powering Off the M7i Router on page 126
Connecting Power to an AC-Powered M7i Router
To connect power to an AC-powered router:
1. Locate the power cords shipped with the router, which should have a plug appropriate
for your geographical location (see “M7i Router AC Power, Connection, and Power
Cord Specifications” on page 83).
2. Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
ESD points on the chassis.
3. Verify that the switch on each power supply faceplate is in the OFF (O) position.
4. For each power supply, insert the appliance coupler end of a power cord into the
appliance inlet on a power supply faceplate and insert the plug into an AC power
source receptacle. Verify that the power cord does not block access to router
components or drape where people could trip on it.
Related
Documentation
Preventing Electrostatic Discharge Damage to an M7i Router on page 228•
• Removing an M7i AC Power Cord on page 181
• M7i AC Power Electrical Safety Guidelines and Warnings on page 254
• M7i AC Power Supply on page 60
• M7i Router AC Power Supply Specifications on page 85
123Copyright © 2019, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
