Figure 27: DC Power Cable Connections
DC Power Lugs
CAUTION: Before routerinstallation begins, a licensed electricianmustattach
a cable lug to the power cables that you supply. A cable with an incorrectly
attached lug can damage the router (for example, by causing a short circuit).
Related
Documentation
• M7i DC Power Supply on page 61
• Replacing a DC Power Supply on page 171
• Replacing an M7i DC Power Cable on page 175
• M7i Router Power Requirements on page 79
• M7i Router DC Power Supply Specifications on page 87
• General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and
T Series Routers on page 254
89Copyright © 2019, Juniper Networks, Inc.
Chapter 11: DC Power Requirements and Specifications