Juniper M7i - Tools and Parts Required to Replace M Series Hardware Components; Table 58: Tools and Parts Required

• Replacing the M7i Routing Engine on page 141
Tools and Parts Required to Replace M Series Hardware Components
To replace hardware components, you need the tools and parts listed in
Table 58 on page 136.
Table 58: Tools and Parts Required
ComponentsTool or part
•
CFEB/CFEB-E
•
Routing Engine
Electrostatic bag or antistatic mat
AllElectrostatic discharge (ESD)
grounding wrist strap
•
CFEB/CFEB-E
•
Fan tray
•
Power supply
•
Routing Engine
Phillips (+) screwdriver, number 2
Routing Engine console port cableFlat-blade screwdriver, 2.5-mm
CompactFlash cardNeedlenose pliers
Fiber-optic PIC or PIC cableRubber safety cap
Related
Documentation
• Displaying M7i Router Components and Serial Numbers on page 213
• M7i Chassis Description on page 11
• M7i Component Redundancy on page 4
Copyright © 2019, Juniper Networks, Inc.136
M7i Multiservice Edge Router Hardware Guide