Juniper M7i - Table 39: States for the M7 I Power Supply LED

Table 39: States for the M7i Power Supply LED
DescriptionStateColorLabel
Power supply is functioning normally, input is occurring, outputs are within range,
and the temperature is within range.
On steadilyGreenOUTPUTOK
Power supply is not functioning, is starting up, or is not properly inserted, or airflow
is not sufficient.
Blinking
Related
Documentation
• Installing an M7i AC Power Supply on page 179
• M7i Power System Description on page 59
• Replacing an M7i AC Power Supply on page 177
• Troubleshooting the M7i Power System When the LED on One M7i Power Supply Is Off
on page 206
Copyright © 2019, Juniper Networks, Inc.62
M7i Multiservice Edge Router Hardware Guide