NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the router are in
compliance.
Table 47 on page 84 provides specifications and Figure 26 on page 84 depicts the plug
on the AC power cord provided for each country or region.
Table 47: AC Power Cord Specifications
Plug TypeElectrical SpecificationCountry
SAA/3240 VAC, 50 Hz ACAustralia
CEE 7/7220 or 230 VAC, 50 Hz ACEurope (except Italy and United Kingdom)
CEI 23-16230 VAC, 50 Hz ACItaly
NEMA 5-15P120 VAC, 60 Hz ACNorth America
BS89/13240 VAC, 50 Hz ACUnited Kingdom
Figure 26: AC Plug Types
North America
(L6-20P)
North America
NEMA
(L6-20)
Australia
(SAA/3)
g003187
Japan
(L6-20P)
China
(PSB-10)
Italy
(CEI 23-16/VII)
Europe
(CEE 7/7)
UK
(BS89/13)
NOTE: Power cords and cables must not block access to router components
or drape where people could trip on them.
Related
Documentation
M7i AC Power Supply on page 60•
• Connecting Power to an AC-Powered M7i Router on page 123
Copyright © 2019, Juniper Networks, Inc.84
M7i Multiservice Edge Router Hardware Guide
To Next Page
Loading...
Need help?
General
