Juniper M7i - Guidelines for Packing M7 I Components for Shipment

Related
Documentation
Contacting Customer Support on page 211•
• Returning a Hardware Component to Juniper Networks, Inc. on page 217
• Tools and Parts Required to Remove Components from an M7i Router on page 218
• Guidelines for Packing M7i Components for Shipment on page 220
Guidelines for Packing M7i Components for Shipment
To pack and ship individual components:
•
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
•
Use the original shipping materials if they are available.
•
Place individual components in antistatic bags.
•
Write the RMA number on the exterior of the box to ensure proper tracking.
CAUTION: Do not stack any of the hardware components.
Related
Documentation
• Contacting Customer Support on page 211
• Returning a Hardware Component to Juniper Networks, Inc. on page 217
• Tools and Parts Required to Remove Components from an M7i Router on page 218
• Packing the M7i Router for Shipment on page 218
Copyright © 2019, Juniper Networks, Inc.220
M7i Multiservice Edge Router Hardware Guide