Juniper M7i - TX Matrix Routing Engines; TX Matrix Plus Routing Engines; Table 30: TX Matrix Routing Engines; Table 31: TX Matrix Plus Routing Engines

The T4000 router supports the CB-LCC control board.
TX Matrix Routing Engines
Table 30 on page 41 lists the Routing Engines supported by the TX Matrix router.
Table 30: TX Matrix Routing Engines
Internal
Ethernet
Interface
Management
Ethernet
Interface
First
Supported
64-bit Junos
OS Release
First
Supported
32-bit Junos
OS Release
Name in CLI
OutputModel Number
fxp1
fxp2
fxp0–7.0RE-3.0 or RE-3.0
(RE-600)
RE-600-2048 (EOL
details: TSB14373)
fxp1
fxp2
fxp0–7.0RE-4.0 (RE-1600)RE-1600-2048 (EOL
details: TSB14374
em0
bcm0
fxp0–8.5RE-A-2000RE-A-2000-4096
bcm0
em1
em011.4R911.4R9RE-DUO-1800RE-DUO-C1800-8G
bcm0
em1
em011.4R911.4R9RE-DUO-1800RE-DUO-C1800-16G
The TXP router supports two control boards, CB-TX and CB-LCC. The CB-LCC is required
for both RE-DUO-C1800-8G and RE-DUO-C1800-16G Routing Engines.
TX Matrix Plus Routing Engines
Table 31 on page 41 lists the Routing Engines supported by the TX Matrix Plus router.
Table 31: TX Matrix Plus Routing Engines
Internal
Ethernet
Interface
Management
Ethernet
Interface
First Supported
64-bit Junos OS
Release
First Supported
32-bit Junos OS
Release
Name in CLI
OutputModel Number
ixgbe0
ixgbe1
em064-bit Junos OS: 11.432-bit Junos OS: 9.6RE-TXP-SFC or
RE-DUO-2600
RE-DUO-C2600-16G
The TX Matrix Plus router supports the CB-TXP control board.
41Copyright © 2019, Juniper Networks, Inc.
Chapter 5: Host Subsystem Components and Description