After the reboot, the router recognizes the new CFEB or CFEB-E.
See Also Maintaining the M7i CFEB and CFEB-E on page 195•
• Troubleshooting the M7i CFEB and CFEB-E on page 207
• Installing the M7i CFEB and CFEB-E on page 184
• Removing the M7i CFEB and CFEB-E on page 183
Related
Documentation
• Preventing Electrostatic Discharge Damage to an M7i Router on page 228
• Maintaining the M7i CFEB and CFEB-E on page 195
• Troubleshooting the M7i CFEB and CFEB-E on page 207
Copyright © 2019, Juniper Networks, Inc.186
M7i Multiservice Edge Router Hardware Guide
To Next Page
