Juniper M7i Hardware Guide

Table 59: Chassis Alarm Messages (continued)
Alarm
SeverityRemedyAlarm Condition
Chassis
Component
RedReplace failed
CFEB/CFEB-E.
CFEB/CFEB-E has failed. If this
occurs, the board attempts to reboot.
CFEB/CFEB-E
RedReplace failed
CFEB/CFEB-E.
Too many hard errors in
CFEB/CFEB-E memory.
RedReplace failed
CFEB/CFEB-E.
Too many soft errors in CFEB/CFEB-E
memory.
RedReplace failed
CFEB/CFEB-E.
A CFEB/CFEB-E microcode download
has failed.
RedReplace failed fan
tray.
A fan has failed.
Fan Trays
RedInstall missing fan
tray.
The fan tray has been removed from
the chassis.
RedContact technical
support. See
“Contacting Customer
Support” on page 211
for more information.
Too many hot-swap interrupts are
occurring. This message generally
indicates that a hardware component
that plugs into the router's midplane
from the front is broken.
Hot swapping
YellowInsert missing power
supply.
A power supply has been removed.
Power supplies
RedReplace failed power
supply
A power supply has failed.
201Copyright © 2019, Juniper Networks, Inc.
Chapter 29: Troubleshooting Components

Juniper M7i Specifications

General

Brand	Juniper
Model	M7i
Category	Network Router
Language	English