Juniper M7i Hardware Guide

Table 36: PICs Supported in the M7i Router (continued)
First
Junos OS
Release
SupportConnectorModel NumberPortsPIC Family and Type
DS3, E1, E3, and T1
10.2
•
Standard DS3 BNC coaxial cable
interfaces
PE-4DS3-E3-IQE-BNC4DS3/E3 Enhanced IQ (IQE) PIC
(M7i Router)
6.0
•
Four RJ-48 connectors (one per
port)
PE-4E1-RJ484E1 PIC (M7i Router)
6.1
•
Standard DS3 BNC coaxial cable
interfaces
PE-4E3-QPP4E3 IQ PIC (M7i Router)
Ethernet
6.0
•
Two-pair, Category 5 unshielded
twisted-pair connectivity through
an RJ-45 connector
•
Pinout: MDI noncrossover
PE-4FE-TX4Fast Ethernet PICs (M7i Router)
6.3
•
Optical: LC/PC
•
Copper: RJ-45
•
Four-pair, Category 5 shielded
twisted-pair connectivity
•
Pinout: MDI crossover
PE-1GE-SFP1Gigabit Ethernet PIC with SFP (M7i
Router)
Ethernet Enhanced IQ2 (IQ2E)
9.4
•
Optical: LC/PC
•
Copper: RJ-45
•
Four-pair, Category 5 shielded
twisted-pair connectivity
•
Pinout: MDI crossover
PE-4GE-TYPE1-SFP-IQ2E4Gigabit Ethernet Enhanced IQ2
(IQ2E) PIC with SFP (M7i Router)
Services
8.1
•
NonePE-MS-100-10Multiservices 100 PIC (M7i Router)
6.0
•
NonePE-TUNNEL0Tunnel Services PIC (M7i Router)
Serial
6.0
•
Two DB-25 male connectors (one
per port, included with PIC)
•
V.35 requires an EIA-530 to V.35
cable and connects to a V.35 DTE
34-pin Winchester type male
cable (one per port)
•
X.21 requires an EIA-530 to X.21
cable and connects to a X.21 DTE
DB-15 male cable
PE-2EIA5302EIA-530 PIC (M7i Router)
49Copyright © 2019, Juniper Networks, Inc.
Chapter 6: Line Card Components and Descriptions

Juniper M7i Specifications

General

Brand	Juniper
Model	M7i
Category	Network Router
Language	English