Keysight B1505A Configuration and Connection Guide 4-9
N1272A and N1273A Connection Guide
Output Connection
Figure 4-6 N1273A Output Terminals
1. Emitter/Source
2. Collector/Drain
3. Base/Gate
4. AC/DC Guard
5. Chassis Common
3-pin Inline Package Socket Module
This module is furnished with the N1273A and provides a socket used for connecting
three-terminal inline packaged device.
To use this module, see the following simple instruction.
•Requirements:
• 3-pin inline package socket module
• DUT
• Instruction:
1. If the earthing wire is not connected to the socket module, connect it.
2. Attach the socket module directly to the Base/Gate, Collector/Drain, and
Emitter/Source terminals of the test fixture.
3. Connect the earthing wire of the socket module to the chassis common terminal.
4. Set your DUT on the socket.
To Next Page
Loading...
Need help?
General
