In This Document
This document provides the following information about Keysight B1505A Power Device
Analyzer/Curve Tracer.
1. Configuration Guide
Describes how to configure the B1505A.
2. N1259A Connection Guide
Describes how to connect the B1505A, the N1259A Test Fixture, and a device under test
(DUT).
3. N1265A Connection Guide
Describes how to connect the B1505A, the N1265A Test Fixture, and a device under test
(DUT).
4. N1272A and N1273A Connection Guide
Describes how to connect the B1505A, the N1273A Capacitance Test Fixture, and a device
under test (DUT).
5. Connection Guide for Wafer Prober and Your Own Test Fixture
Describes how to connect the B1505A, accessories, and a DUT interface such as wafer prober
and your own test fixture.
6. Accessory Dimensions
Describes dimensions and weight of accessories.
7. Connection and Ordering Examples
Describes prober connection and ordering examples.
To Next Page
Loading...
Need help?
General
