N9030B PXA Signal Analyzer Service Guide 405
Replaceable Parts
Hardware
Table 15-9 RF Area (Options 544, 550)
Item Description Keysight Part Number
1 A9 RF Attenuator A (0-10 dB) (Options 544, 550) 33326-60013
2 A10 RF Attenuator B (0-60 dB) (Options 544, 550) 33325-60020
3 A11 Options 544, 550 N9020-60051
4 A12 YTF Preselector (Options 544, 550) 5087-7383
5 A20 YTO Assembly N9020-60009
J1 2.4 mm Input Connector Assembly (Options 544, 550) N9030-60011
W2 Cable, semi-rigid, RF Input to Attenuator A (Options 544, 550) N9020-20173
W3 Cable, semi-rigid, Cal In to attenuator, Reference Assy J701 to
Attenuator A (Options 544, 550)
N9020-20072
W4 Cable, semi-rigid, Attenuator B to Attenuator A (Options 544, 550) N9020-20068
W6 Cable, semi-rigid, Attenuator B to Low Band Switch (Options 544,
550 without Option MPB or LNP)
N9010-20004
W8 Cable, semi-rigid, Front End assy J2 to Low Band Switch J2
(Options 544, 550)
N9020-20131
W20 Cable, semi-rigid, Front End Assy J4 To YTO (Options 503, 508, 513,
526 - without EP0)
N9020-20152
W56 Cable, semi-rigid, Low band Switch assy J3 to YTF input (Options
544, 550 without Option MPB or LNP)
N9010-20005
W57 Cable, semi-rigid, YTF output to Front End assy J9 (Options 544,
550 without Option MPB or LNP)
N9010-20006
To Next Page
Loading...
Need help?
General
