Kohler KDI 1903 TCR Workshop Manual

77
EN
2.17.5 ACACT (versions with DOC+DPF device - Stage V
only)
- Only handle by means of the points marked by
Y
.
- It is forbidden to handle using the points marked by
N
.
NOTE:
The sensor includes ceramic material.
- Do not install sensors which suffered impacts or falls.
- Do not install sensors in case of external contamination
- Do not install visibly damaged sensors
- Use exclusively the socket wrench to install the sensor
Fig 2.59a
2.17.6 EGTS ( versions with DOC+DPF device - Stage V only )
- Only handle by means of the points marked by
Y
.
- It is forbidden to handle using the points marked by
N
.
NOTE:
The sensor includes ceramic material.
- Do not install sensors which suffered impacts or falls.
- Do not install visibly damaged sensors
- Do not install sensors in case of external contamination
- Do not apply any force on the cable or the metal elbow
Fig 2.59b

Kohler KDI 1903 TCR Specifications

General

Brand	Kohler
Model	KDI 1903 TCR
Category	Engine
Language	English